I hope this is helpful for you, if you have any questions on methods, or you’d like some training or advice then don’t hesitate to get in touch.
Video Transcript Today in the Lab – Cheese Melt Rheology
Hey guys, Joey from the rheology lab here.
We’re just checking out what one of our rheometers re-raised up to today I have a stepped cross hatch plate on the bottom here and an 40 mm cross hatch upper geometry and she is running an oscillation temperature sweep.
Now essentially what we do in this test is we apply a constant oscillation stress as we ramp the temperature of the sample from about room temperature 15 degrees up to 80 degrees.
What we should see in the results is a drop in complex modulus and an increase in phase angle as the cheese transitions through the melts.
Now this is useful if we’re comparing the melt behaviour of other formulations particularly if you’re interested in comparing non-dairy to dairy-based cheeses.




